Publicidad
Idiomas disponibles
Idiomas disponibles
English
EN
Tones Audible
1.
Lightly touch and hold the UP key for 5 seconds to enter Setup mode, then touch
the ON key four (4) times.
2.
Use the UP and DOWN keys to select the audible tones. S0: sensor
tone ON, alarm tone OFF
S1: Sensor tone ON, Alarm tone ON (default) S2: Sensor
tone OFF, Alarm tone OFF S3: Sensor tone OFF, Alarm
tone ON
3.
Press and hold the UP key for 5 seconds to confirm the selection.
Display of the Temperature
TEMPERATURE DISPLAY
During normal operation, the temperature indicator on the control panel shows the temperature
inside the appliance. The temperature indicator will flash if
A different temperature is being set,
-
Zone temperature deviates more than 5°C (9°F) from the set temperature.
-
The intermittent temperature display ensures that the temperature cannot inadvertently rise or
fall and damage the wine.
Memory Function From Temperature
TEMPERATURE MEMORY FUNCTION
In the event of a power failure (power surge, circuit breaker, etc.), the unit remembers the
previous temperature settings. When the power is restored, the cabinet temperature will return
to the same temperature setting as before the power interruption.
Temperature Alarm
TEMPERATURE ALARM
An acoustic alarm will sound if the temperature of one of the zones rises or falls outside
the temperature range. The corresponding temperature indicator shall flash at the same
time and the symbols and shall light up.
The temperature at which the appliance is set determines the temperature that the
appliance recognises as too hot or too cold.
Pando
175
Pando Wine Cellar
Publicidad
