Pando PVMB 30-16CR Manual página 175

SUBIR Se utiliza para aumentar la temperatura SUBIR Se utiliza para aumentar la temperatura
Pando
BAJAR Se utiliza para bajar la temperatura fijada en BAJAR Se utiliza para bajar la temperatura fijada en
Pando Wine Cellar
Symbols on the screen
Símbolos en la pantalla Símbolos en la pantalla
Symbols on the screen
Symbols on the screen
Display of the temperature or error code of the upper/left area
Display of the temperature or error code
Compressor is switched on
Heating is on
Defrost mode
Dynaclima mode
Eco Demos mode
The interior light is in display mode.
Warning
Acoustic signal
Child lock is activated
Multi-key function
To perform the multi-key function, lightly touch and hold the first key, then touch the remaining
key for at least 5 seconds, then release all keys. Temperature control setting
• The unit has two independent temperature zones. The temperature of both zones can
be adjusted between 5ºC and 20ºC (41ºF and 68ºF). For serving wine, the recommended
temperature of the UPPER zone should be between 5ºC and 10ºC (41ºF and 50ºF), ideal for
serving champagne and white wine, and the recommended temperature of the LOWER zone
should be between 15ºC and 20ºC (58ºF and 68ºF), ideal for serving red wine.
• When the unit is plugged in for the first time, it will automatically turn on with the default
settings. The factory preset temperature for the UPPER temperature zone is 8ºC (46ºF) and for
the LOWER temperature zone is 12ºC (54ºF).
• Touch the setting dial until the temperature you want to set flashes. You can then use
the UP and DOWN keys to set the desired indoor temperature. When you touch either key for
the first time, the display will show the last previously set temperature.
en 1°C en 1°C
. .
172
. .
English
EN