Publicidad
Idiomas disponibles
Idiomas disponibles
Pando
Pando Wine Cellar
•
You can load your wine bottles in a single row or stacked, keeping in mind the following:
if you do not have enough bottles to fill your wine cooler, it is better to distribute the load along
the wine cooler in order to avoid loading "all up" or "all down".
•
Do not remove or change the adjustable wooden shelves to accommodate more bottles
or increase the capacity of the wine cellar by stacking the bottles if necessary (see removal of
shelves).
•
Maintain small spaces between walls and bottles to allow air circulation. Like an
underground cellar, air circulation is important to avoid mould and to generate a more
homogeneous temperature.
•
Do not overload your cellar to facilitate air circulation.
•
Lay the bottles flat.
•
Prevent obstruction of the internal fans (located inside the rear panel of the unit).
•
Do not introduce contaminants. Store only wine in your unit to ensure that the
environment is odour free.
•
Only store wine with unopened bottles. Storing opened bottles can lead to spillage.
Shelves with top-hat rails
SHELVES WITH TELESCOPIC RAILS
To avoid damaging the door seal, be sure to have the door fully open when removing the shelves
from the rail compartment.
To facilitate access to the bottles, the shelves should be pulled out about 1/3 of the rail
compartment.
• To remove the shelves from the rails, pull out each shelf as far as it will go.
SEE DETAIL IMAGE A
180
English
SEE DETAIL IMAGE B
EN
Publicidad
