Publicidad
Idiomas disponibles
Idiomas disponibles
Pando
Pando Wine Cellar
CONFIGURATION MODE
Some wine cooler settings can only be selected in the Settings mode.
Touch and hold the UP key for 5 seconds to enter and exit the Settings mode. The device will
automatically exit Settings mode after approximately one minute.
ºF/ºC Selection
1.
Lightly touch and hold the UP key for 5 seconds to enter Setup mode.
2.
Use the UP and DOWN keys to select the temperature display setting in Fahrenheit or
Celsius.
3.
Press and hold the UP key for 5 seconds to confirm the selection.
Brightness Display
1.
Lightly touch and hold the UP key for 5 seconds to enter Setup mode, then touch the ON
key once.
2.
Use the UP and DOWN keys to select the brightness of the display when the door is
closed. When the door is open, the display brightness returns to its normal level.
d0: off
d1: dimmer setting (default) d2:
medium setting
d3: brighter setting
3. Press and hold the UP key for 5 seconds to confirm the selection.
Lighting Indoor
1.
Lightly touch and hold the UP key for 5 seconds to enter Setup mode, then double-tap the
ON key.
2.
Use the UP and DOWN keys to select the brightness of the interior lighting when the door
is closed. When the door is open, the interior lighting returns to its normal level.
L0: off when door is closed or open L1: dimmer setting
L2: medium setting
L3: brightest setting (default)
3. Press and hold the UP key for 5 seconds to confirm the selection.
Mode Fan
1.
Lightly touch and hold the UP key for 5 seconds to enter Setup mode, then touch the ON
key three (3) times.
2.
Use the UP and DOWN keys to select the fan mode.
F0: Silent mode - energy saving mode (default) F1: DynaClima
mode - half time
F2: DynaClima mode - full time
3.
Press and hold the UP key for 5 seconds to confirm the selection.
174
English
EN
Publicidad
