Publicidad
Idiomas disponibles
Idiomas disponibles
Pando
Pando Wine Cellar
The audible alarm will sound and the temperature display will flash:
- When switching on the appliance, if the temperature inside the appliance is very different from the set
temperature.
- When there has been a prolonged power failure.
- When too many items have been put into the unit at the same time. Or too much ambient air
has entered when rearranging and removing stored items.
- When the door is not properly closed.
- The device is faulty.
The audible alarm will be automatically silenced, the temperature display will stop flashing and the
warning symbols and audible signal tones (bell) will be switched off when the set temperature is
reached again. However, if the noise bothers you, you can deactivate the audible alarm beforehand by
touching any key once and the alarm will stop. The corresponding temperature indicator will continue to
flash and the warning symbols and audible tone signal (bell) will remain lit until the set temperature is
reached. The display will then be steadily illuminated, the warning symbols and audible signal tones
(bell) and the alarm system will be fully active again.
Door Alarm
DOOR ALARM
If the door has been open for more than 60 seconds, the audible alarm will sound and the audible tone
signal symbol (bell) will light up. By closing the door or touching any key once you can turn off the
audible alarm.
Dynclima / Silent Mode
DYNACLIMA / SILENT MODE
The appliance has two different operating modes: DynaClima and Silent modes.
The DYNACLIMA (Dynamic Climate) mode allows the relative humidity inside the unit and the
temperature to be evenly distributed throughout the interior so that you can store all your wine in
exactly the same excellent conditions. If you want to use the unit for long-term wine storage, the
DYNACLIMA mode is a must. This will create a continuous climate in the cabinet that mimics
that of a wine cellar.
In DYNACLIMA mode, the indoor fan circulates the indoor air evenly even when the set
temperature is reached. Using the DYNACLIMA mode increases the noise level during
operation. The symbol will light up. In SILENT mode (also known as energy saving mode), the
appliance will operate without the fan once the set temperature is reached. The symbol will go
out.
176
English
EN
Publicidad
