CAMPAGNOLO BORA 2003 FULL CARBON Manual De Uso página 31

• For every spoke (Fig. 10):
- insert the new spoke in the hole in the new rim.
- insert the plate, positioning the longest side longitudinally com-
pared with the rim rotation direction.
- tighten the nut.
Attention
After completing the operation, check that the flat spoke (aero) is ori-
ented in an aerodynamic position (Fig. 11).
WARNING!
When fitting the wheel, check that the plates remain in position
since an incorrectly positioned plate may cause irreparable
damage to the profile of the rim when tensioning the spokes.
This damage could cause the rim to unexpectedly fail (Fig. 10),
resulting in an accident personal injury or death.
• Perform these operations for all spokes.
• Following the operations described in Section 5 of the "Owner's
Manual - PART 1":
- Tighten and Settle the Spokes.
- Check centering and wheel dishing.
8
10 11
OK! NO!