CAMPAGNOLO BORA 2003 FULL CARBON Manual De Uso página 40

6.2 - DISASSEMBLY AND ASSEMBLY OF THE REAR HUB
• Remove the sprocket set (Section 2 of the "Owner's Manual - PART 1).
• Using a stiff blade (such as small knife) positioned as indicated in Fig. 35 and taking care not to damage
the hub or the spokes, remove the side covers from the hub (A - Fig. 35).
• Unscrew the locking nut (B - Fig. 36) with a fully inserted 5 mm Allen wrench; counter the rotation of the
axle with another 5 mm Allen wrench fully inserted on the opposite end of the axle itself.
• Align the screw (D - Fig. 37) of the lock ring (C - Fig. 37) with the groove (E - Fig. 37) on the hub body.
• Using a 2.5 mm Allen wrench, slacken the screw by 3 turns (D - Fig. 38).
36
B
37
D
C
E
35
A
38
D
17