CAMPAGNOLO BORA 2003 FULL CARBON Manual De Uso página 33

• Unscrew the locking nut (B - Fig. 15) with a fully inserted 5 mm
Allen wrench; counter the rotation of the axle with another 5 mm
Allen wrench fully inserted on the opposite end of the axle itself.
• Align the screw (D - Fig. 16) of the lock ring (C - Fig. 16) with the
groove (E - Fig. 6) on the hub body.
• Using a 2.5 mm Allen wrench, slacken the screw by 3 turns (D -
Fig. 17).
• Unscrew and remove the lock ring (C - Fig. 18), remove the ring (F
- Fig. 18), then slide out the axle (G - Fig. 18).
16
D
C
E
10
17
D
15
B
18
C F
G