Garant SB1 Manual De Uso página 53

Fault
Process crashed. Restart process?
Process crashed again. Set to factory
settings and software version?
11.3. UNLATCH THE EMERGENCY STOP SWITCH
WARNING
Unlatch the emergency stop switch
Serious injuries to the hands.
» Do not unlatch the emergency stop switch until the hazardous situation has been rectified.
ü Rectify the hazardous situation.
1. Twist the emergency stop switch in direction of the arrow and pull it upwards.
» The emergency stop switch is now released.
2. Acknowledge the warning message on the screen.
» The setting bench is now ready for operation.
11.4. RESETTING TO FACTORY SETTINGS
i
The setting device can be reset to factory settings. In doing so all settings, including favourites and history, are deleted.
Update & Restore
SB1 Update
Your System is already up to date. Last checked:
ü
SB1 Restore
The SB1 can be reset to factory settings. All data and settings will be deleted.
ü Settings has been selected.
1. Select "Update & Restore".
2. Select "Restore Factory-Defaults".
» Device will be reset to factory settings.
12. Disassembly
G
1. Remove cable, adapter, measuring tool and connected devices. Disconnect setting device from power supply.
2. Clamp foam between ceramic gauge blocks and push together manually.
3. Fasten foam around slide.
4. Position the monitor parallel to the setting device.
5. Wrap monitor and casing in bubble wrap and secure with adhesive tape.
Possible cause
Setting Bench or a start component has
crashed.
Setting Bench or a start component has
crashed again.
Search for Updates
Restore Factory-Defaults
Action
Start the process afresh.
Reset to factory settings.
Contact Hoffmann Group customer ser-
vice.
www.hoffmann-group.com
de
en
cs
da
es
fi
fr
hr
hu
it
lt
nl
pl
ro
ru
sl
sv
53