Publicidad
Idiomas disponibles
Idiomas disponibles
CAUTION
Do not install the steering control levers in reverse.
Note: Always drive with both hands on the steering
control levers. Do not drive with just one hand.
5
FEATURES AND CONTROLS
The following section provides a brief description of
the function of individual controls. For information on
starting, stopping, driving, and mowing, refer to the
Operation (Reference ) section.
5.1
PRODUCT CONTROLS
12
11
10
Roll bar
1
Suspension seat
2
Steering control
3
levers
Cup holder
4
Charging port
5
ETO socket
6
Front hitch
7
5.1.1 SUSPENSION SEAT
The mower is equipped with a suspension seat. This
seat has several additional options. See the figure and
list below for the location of the seat's features and brief
description of their function.
1. Retractable Seat Belt: The seat belt is used to
secure the operator in the seat.
Note: The seat belt should always be worn when the
roll bar is in the raised position. The seat belt should
never be worn when the roll bar is in the down position.
1
2
3
4
5
6
9
8
Anti-scalp wheels
8
Foot pedal & Deck
9
height adjustment
pin
10 Discharge chute
11 Control panel
12 Rear storage bin
English
2. Suspension Adjustment Knob: The suspension
adjustment knob adjusts the suspension of the seat.
Turn the adjustment knob until the display scale has a
reading that matches the weight of the operator.
3. Seat Adjustment Lever (Forwards / Backwards):
The seat can be adjusted forward and back. Lift the seat
adjustment lever and hold, position the seat as desired,
and release the lever to lock the seat in position.
Be sure the seat is locked before operating the mower.
A seat that is not secure can cause the operator
to shift and lose control of the mower and result in
possible death or serious personal injury.
5.1.2 STEERING CONTROL LEVER
7
The steering control levers control the direction of the
mower.
15
1
2
WARNING
EN
3
Publicidad
