Publicidad
Idiomas disponibles
Idiomas disponibles
7.3
STOP THE PRODUCT
DANGER
Never make sudden stops or reverse direction,
especially when maneuvering on a slope. The steering
is designed for sensitive response. Rapid movement
of the steering control levers in either direction could
result in a reaction of the product that can cause
serious injury.
1. Drive the mower to a flat, level surface and return
the steering control levers to the NEUTRAL position
to stop the mower's movement. Push the steering
control levers outward to engage the parking brake.
2. Push down PTO switch to disengage the blades.
3. Rotate start key to the OFF position. Remove the
start key.
7.4
DIGITAL DISPLAY SCREEN
The function of the digital display, located on the control
panel, is to provide electrical system information to the
operator. It gives detailed information in the form of
patterns, codes and numbers.
1 2
7
English
3
4 5 6
8
9
#
Name
Function
1
Error warning. Check the error code.
2
ETO device is under operation. If it
blinks, the device is connected.
3
Total: 350h Working time
4
User presence needed to operate.
5
LED Lights activated.
6
The parking brake is engaged. If the
icon is blinking, neutral bypass func-
tion is activated.
7
Blade speed
8
Drive speed
9
Battery level
7.4.1 HOME SCREEN
1. The drive speed has 3 levels and the blade speed
has 4 levels. Press the Blade Speed button and
Drive Speed button on the control panel to adjust.
The level of the green icon at each side indicates
the current driving speed or blade speed.
2. If the drive/blade system has errors, the driving/
blade speed bar will turn gray until the error is
cleared.
21
EN
Publicidad
