Publicidad
Idiomas disponibles
Idiomas disponibles
16.3 POWER MANAGEMENT UNIT (IN THE BATTERY COMPARTMENT) ERROR
CODES
Error Co-
Errors Contents
des
PMU 1
Overcurrent-Level1
PMU 2
Overtemperature-Level1
PMU 33
Hardware overcurrent
PMU 34
Feedback overcurrent
PMU 35
Overtemperature-Level2
PMU 36
Undervoltage
PMU 37
Overvoltage
PMU 38
Power supply output fail-
ure
PMU 41
No battery pack available
PMU 46
Power circuit error
PMU 47
Pre-charge error
PMU 48
Pre-charge hardware error Contact your distributor for a solution.
PMU 49
Negative MOS tempera-
ture sensing error
PMU 52
Current sensor error
PMU 57
KSI Pre-MOS error
PMU 59
KSI MOS error
PMU 61
Battery pack 1 does not
match
PMU 62
Battery pack 2 does not
match
PMU 63
Battery pack 3 does not
match
English
Suggestions
The PMU load is too high. The error will automatically resolve itself when
the load drops.
The PMU temperature is too high. The error will automatically resolve
itself when the temperature drops.
The PMU load is too high. Restart the power supply.
Restart the power supply.
The PMU temperature is too high. Wait until the temperature drops, then
restart the power supply.
The voltage is too low. Charge the battery pack and try again.
The voltage is too high. Restart the power supply.
Restart the power supply.
Check that you are using the correct battery pack, and then restart the
power supply.
Contact your distributor for a solution.
Restart the power supply and contact your distributor for a solution.
Contact your distributor for a solution.
Contact your distributor for a solution.
Contact your distributor for a solution.
Contact your distributor for a solution.
Replace the battery pack with a suitable voltage platform.
Replace the battery pack with a suitable voltage platform.
Replace the battery pack with a suitable voltage platform.
43
EN
Publicidad
