Publicidad
Idiomas disponibles
Idiomas disponibles
1 English
*1
For more information about Auto-Tuning, refer to the Technical Manual.
Note:
When you use MEMOBUS/Modbus communications to set parameters, set H5-11 = 1 [Comm ENTER Command Mode = ENTER
Command Not Required].
■
Check before Energizing the Drive
Examine these items before you energize the drive:
• Make sure that all wires are connected correctly. Also make sure that motor phases are connected in the correct
sequence.
• Make sure that there are no screws, loose wire ends, or tools in the drive.
24
Figure 1.9 Flowchart for Basic Setup Procedure
YASKAWA TOMPYEULA7002A LA700 Series Installation and Operation Instruction
Publicidad
