Speaker Settings (Speaker) - Sony DAR-RH7000 Manual De Instrucciones

Synchro Rec
Selects the recording destination used for
Synchro-Recording (page 57).
Record to
HDD
Record to
DVD
HQ Setting (HDD only)
Selects the HQ mode used for recording on the
HDD (page 48).
HQ+
HQ
Colour System
Selects the colour system when playing VIDEO
CDs (including Super VIDEO CDs).
PAL
NTSC
Screen Saver
The screen saver image appears when you do not
use the recorder for more than 10 minutes while an
on-screen display, such as the System Menu, is
displayed on your TV screen. The screen saver
image helps prevent your display device from
becoming damaged (ghosting).
On
Off
100
Records to the HDD.
Records to DVDs.
Records in higher quality
(approximate 15 Mbps).
Records in the standard HQ mode.
Plays a disc in PAL colour system.
Plays a disc in NTSC colour
system.
Turns on the screen saver function.
Turns off the function.

Speaker Settings (Speaker)

The "Speaker" setup allows you to adjust the
speaker system (speaker positions, loudness, etc.).
Note
Check that the subwoofer is turned on, and that the
system cord is connected securely.
1
Press SYSTEM MENU while the recorder is
in stop mode.
2
Select "SETUP," and press ENTER.
3
Select "Speaker," and press ENTER.
The "Speaker" setup appears.
SETUP
Settings Size
Video Distance
Audio Level
Features Test Tone:
Speaker
Options
Easy Setup
4
Select an item.
"Size": Selects the surround speaker position,
etc. (page 101).
"Distance": Sets the speaker distance from the
listening position (page 101).
"Level": Sets the speaker level (page 102).
"Test Tone": Emits the test tone for adjusting
the individual speaker levels (page 102).
5
Press ENTER.
Options for the selected item appear (see
below). The default settings are underlined.
6
Select an option, and press ENTER.
Off