Sony DAR-RH7000 Manual De Instrucciones página 91

8
Press M/m repeatedly until the channel you
want is displayed, then press ENTER.
The channels are scanned in the order shown
in the table below.
• If you know the number of the channel you
want, press the number buttons. For
example, for channel 5, first press "0" and
then press "5." Then press ENTER.
9
Select "Audio," and press ENTER.
Settings - Channel Setting
System :
Normal / CATV :
Channel Set :
Station Name :
PAY - TV / CANAL+ :
Audio :
NICAM
Normally, select this.
Standard Select this if the sound from
NICAM broadcasts is not
clear.
10
Select "NICAM," and press ENTER.
11
Select "AFT" and press ENTER.
Settings - Channel Setting
Normal / CATV :
Channel Set :
Station Name :
PAY - TV / CANAL+ :
Audio :
AFT :
On
Turns on the Auto Fine
Tuning function. Normally,
select this.
Off Allows you to adjust the
pictures manually.
12
Select "On" to turn on AFT, and press
ENTER.
• If the Auto Fine Tuning function does not
work effectively, select "Off" and press
ENTER. When the fine tuning bar appears,
press </, to obtain a clearer picture, and
press ENTER.
• To preset another channel, repeat from step
2.
Prog. 8
BG
Normal
C 5 5
CDE
Off NICAM
NICAM Standard
Prog. 8
Normal
C 5 5
CDE
Off
NICAM
On
Off
◆Receivable channels
TV system Channel coverage
BG (West European E2 - E12 VHF
Countries, except
Italia A – H VHF
those listed below)
E21 – E69 UHF
S1 – S20 CATV
S21 – S41 HYPER
S01 – S05 CATV
DK (East European R1 – R12 VHF
Countries)
R21 – R69 UHF
S1 – S20 CATV
S21 – S41 HYPER
S01 – S05 CATV
I (Great Britain/ Ireland A – J VHF
Ireland)
South Africa 4 – 13 VHF
B21 – B69 UHF
S1 – S20 CATV
S21 – S41 HYPER
S01 – S05 CATV
L (France) F2 – F10 VHF
F21 – F69 UHF
B – Q CATV
S21 – S41 HYPER
◆Tuning the French CATV channels
This recorder can scan the CATV channels B to Q
and the HYPER frequency channels S21 to S41.
On the Channel Set menu, the channels are
indicated as S1 to S44. For example, channel B is
indicated by Channel Set number S1, and channel
Q is indicated by Channel Set number S23 (see the
table below). If the CATV channel you want to
preset is indicated by its frequency (for example,
152.75 MHz), refer to the table below to find the
corresponding channel number.
Corre- Channel
sponding Set
channel number
B S1
C S2
D S3
D S4
E S5
Receivable
Frequency range
(MHz)
116.75–124.75
124.75–132.75
132.75–140.75
140.75–148.75
148.75–156.75
,continued 91