Sony DAR-RH7000 Manual De Instrucciones página 56

: Indicates the setting that the Update
function is set for.
When all of the timer settings do not fit on the
list, scroll bar appears.
To view the hidden timer settings, press M/m.
2
Select the timer setting you want to check/
change/cancel, and press ENTER.
The sub-menu appears.
3
Select one of the options, and press
ENTER.
"Modify": Changes the timer setting.
Select an item using </, and adjust using
M/m. For the PDC/VPS or Update functions,
select "Details" and change the settings
(page 51). Select "OK," and press ENTER.
Modify
Modify the timer setting.
Date Start
Mon-Sat 22 00 :
PDC/VPS
"Erase": Erases the timer setting. Select
"OK," and press ENTER.
Erase
Are you sure you want to erase this timer setting?
Mon-Sat 22:00-22:15
HDD SP
OK
"Check Overlap": Checks for overlapped
settings.
Check Overlap
These timer settings overlap.
Fri 29.10 20:30-21:30
Fri 29.10 21:00-22:00
Select "Close" to return to the Timer List.
To change or cancel the setting, repeat steps 2
and 3 above.
56
OK
Cancel
Stop Prog. Media Mode
Details
22 15 : AAB
HDD SP
Off Update On
AAB
Cancel
DEF DVD SP PDC/VPS
GHI DVD SLP PDC/VPS
Close
When timer settings overlap
The programme that starts first has priority and the
second programme starts recording only after the
first programme has finished.
7:00 8:00
A
will be cut off
◆When recordings start at the same time
The programme that is set last has priority. In this
example, timer setting B is set after A, so the first
part of timer setting A will not be recorded.
7:00 8:00
A
B
◆When the end time of one recording and the
start time of another are the same
After finishing the previous recording, the other
recording may be delayed.
7:00
A
To scroll the list display by page (Page mode)
Press while the list display is turned on.
/
Each time you press
List changes to the next/previous page of timer
settings.
To turn off the Timer List
Press TIMER LIST or
z Hint
While recording, you cannot modify the timer setting for
the current recording, but you can extend the recording
duration of the recording time (page 51).
Notes
• When "PDC/VPS" is set to "On" for one or more timer
recordings, the start times may change in the event of a
broadcast delay or early start.
• Even if the timer is set, timer recordings cannot be
made while recording a programme that has priority.
• Even if the timer is set for the same daily or weekly
programme, the timer recording cannot be made if it
overlaps with a programme that has priority. "
appear next to the overlapped setting in the Timer List.
Check the priority order of the settings.
9:00 10:00
B
9:00 10:00
9:00 10:00
B
, the entire Timer
/
O
RETURN.
" will