Sony DAR-RH7000 Manual De Instrucciones página 17

Installing the speakers (DAR-
RH7000)
Attach the front speakers to the supplied speaker
stands.
1
Thread the speaker cord through the hole in
the bottom of the speaker stand.
2
Thread the speaker cord through the post of
the speaker stand, and connect it to the
speaker terminals. Ensure the rear holes of the
speaker are oriented as illustrated below.
3
Securely attach the speaker to the stand with
the supplied screws after adjusting the height
of the speaker.
Screw
4
Take up the slack of the speaker cord.
,continued 17