Step 8: Easy Setup - Sony DAR-RH7000 Manual De Instrucciones

11
Press M/m to select an available TV
system, BG, DK, I, or L, and press ENTER.
To receive broadcasts in France, select "L."
12
Select "Normal/CATV," and press ENTER.
Settings - Channel Setting
System :
Normal / CATV :
Channel Set :
Station Name :
PAY - TV / CANAL+ :
Audio :
13
Select "Normal," and press ENTER.
To preset CATV (Cable Television) channels,
select "CATV."
14
Select "Channel Set," and press ENTER.
Settings - Channel Setting
System :
Normal / CATV :
Channel Set :
Station Name :
PAY - TV / CANAL+ :
Audio :
15
Select the PAY-TV/Canal Plus channel,
and press ENTER.
16
Select "PAY-TV/CANAL+," and press
ENTER.
Settings - Channel Setting
System :
Normal / CATV :
Channel Set :
Station Name :
PAY - TV / CANAL+ :
Audio :
17
Select "On," and press ENTER.
To return to the previous step
Press O RETURN.
Note
When you set "Line3 Input" to "Decoder" in step 5
above, you will not be able to select "L3" because Line 3
will become a dedicated line for the decoder.
34
Prog. 6
BG
Normal
Normal
C 2
CATV
PQR
Off
NICAM
Prog. 6
BG
Normal
C 2
C24
PQR
Off
NICAM
Prog. 6
BG
Normal
C 24
PQR
Off On
NICAM
Off

Step 8: Easy Setup

Make the basic adjustments by following the on-
screen instructions in "Easy Setup."
1
4
7
O RETURN
1
Press [/1 to turn on the recorder and set
the input selector on your TV so that the
signal from the recorder appears on your
TV screen.
A message regarding initial settings appears.
• If this message does not appear, select "Easy
Setup" from "SETUP" in the System Menu
to run "Easy Setup" function (page 104).
2
Press ENTER.
Follow the on-screen instructions to make the
following settings.
◆ OSD
Select the language for the on-screen displays.
◆ Tuner System
Select your country or language.
The programme position order will be set
according to the country you set.
To set the programme positions manually, see
page 90.
• If you live in a French speaking country that
is not listed on the display, select "ELSE."
◆ Clock
The recorder will automatically search for a
clock signal.
• If a clock signal cannot be found, set the
clock manually using
ENTER.
[/1
2 3
5 6
8 9
0
</M/m/,,
ENTER
, and press
</M/m/,