Sony DAR-RH7000 Manual De Instrucciones página 58

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

3
Press INPUT SELECT repeatedly to select
"L3."
4
Select the line input audio when recording
a bilingual programme on the HDD or DVD-
RWs (VR mode).
Press TOOLS, select "Line Audio Input," and
press ENTER. Then select "Bilingual," and
press ENTER.
For details about bilingual recording, see
page 49.
5
Press REC MODE repeatedly to select a
recording mode.
For details about the recording mode, see
page 48.
6
Set the timer on the connected equipment
to the time of the programme you want to
record, and turn it off.
7
Press SYNCHRO REC.
The SYNCHRO REC indicator lights up on
the front panel. The recorder is ready to start
Synchro-Recording.
The recorder automatically starts recording
when it receives an input signal from the
connected equipment. The recorder stops
recording when the connected equipment
turns off.
To stop recording
Press x REC STOP or SYNCHRO REC.
To cancel Synchro Rec
Press SYNCHRO REC.
The SYNCHRO REC indicator on the recorder
turns off.
58
Notes
• The recorder starts recording only after detecting the
video signal from the connected equipment. The
beginning of the programme may not be recorded
regardless of whether or not the recorder's power is on
or off.
• During Synchro-Recording, other operations such as
normal recording cannot be done.
• To use the connected equipment while the recorder is
standing by for Synchro-Recording, cancel Synchro-
Recording by pressing SYNCHRO REC. Be sure to
turn off the connected equipment and press
SYNCHRO REC to reset Synchro-Recording before
the timer recording starts.
• The Synchro Rec function does not work when "Line3
Input" of "Scart Setting" in "Video" setup is set to
"Decoder" (page 96).
• The Synchro Rec function does not work with some
tuners. For details, see the tuner's operating
instructions.
• While the recorder is standing by for Synchro-
Recording, the Auto Clock Set function (page 94) does
not work.
• To use the Synchro Rec function, you must first set the
recorder's clock correctly.
If a timer setting of Synchro-Recording and
another timer recording overlap
Regardless of whether or not the programme is a
Synchro Rec programme, the programme that
starts first has priority and the second programme
starts recording only after the first programme has
finished.
7:00
First
programme
Second
programme
8:00
9:00
10:00
will be cut off

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Dar-rh1000

Tabla de contenido