Sony DAR-RH7000 Manual De Instrucciones página 82

C Available space on the disc to be
dubbed (approximate)
D Information about the title to be dubbed
E Dubbing mode and the size of the title
after dubbing (approximate)
6
Select "Dub Mode."
7
Select a dubbing mode by pressing M/m.
Fast*
HQ
SEP
* Appears when High-speed Dubbing is available
for the title (page 79).
8
Select "Start," and press ENTER.
The dubbing indication appears in the front
panel display (page 42).
To automatically adjust the dubbing mode
(Auto Dub Mode)
If there is not enough available space on the target
disc, the recorder automatically selects a dubbing
mode with lower picture quality according to the
available space. If there is insufficient disc space
in the selected dubbing mode, the following
display appears after step 8.
Title Dub
There is not enough memory for the dubbing.
Select "Auto Dub Mode" or adjust the mode.
Auto Dub Mode
Select "Auto Dub Mode" and press ENTER to
start dubbing. To manually select another dubbing
mode, select "Reset," and go to step 7.
To stop dubbing
Press TOOLS, select "Stop Dubbing," and press
ENTER. When asked for confirmation, select
"Yes," and press ENTER.
z Hints
• If disc space is still insufficient for the selected dubbing
mode, erase unnecessary parts of the title, or free up
disc space by erasing titles on the disc (page 72).
• You can turn off the recorder during dubbing. The
recorder completes dubbing even after being turned
off.
82
HSP SP
SLP EP LP
Reset Cancel
Dubbing multiple titles (Dub
Selected Titles)
A maximum of 30 selected titles can be dubbed at
once. You can select the dubbing mode for each
title.
1
Insert the DVD that you are going to dub to
or from.
2
Press HDD or DVD to select the source.
LSP
3
Press TITLE LIST to turn on the Title List
menu.
4
Press TOOLS, select "Dub Selected
Titles," and press ENTER.
Dub Selected Titles
Select title(s) in the order you want to dub them.
ORIGINAL
4
World Tour – Asia 3
3
World Cup Final
2
World Tour – Asia 2
1
World Tour – Asia 1
5
Select titles in the order you want to dub,
and press ENTER.
The titles are numbered in the selected order.
• To cancel the selection, press ENTER again.
• If a title with
the title list, a confirmation screen is
displayed.
To "Move," select "Yes."
6
Repeat step 5 to select all of the titles you
want to dub.
• To make adjustments for each of the titles,
select "Settings" (see "To adjust the settings
for each title" below).
• To cancel all of the selections, select
"Reset," and go to step 5.
7
Select "Start," and press ENTER.
The dubbing indication appears in the front
panel display (page 42).
0.0 GB 4.6 GB
Start
Cancel
25.6
20.6
Settings
18.6
Reset
11.6
(page 80) is selected in