Sony DAR-RH7000 Manual De Instrucciones página 31

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Connecting to a satellite or digital tuner
Connect a satellite or digital tuner to this recorder using the LINE 3/DECODER jack. Disconnect the
recorder from the mains when connecting the tuner.
To use the Synchro-Rec function, see below.
to i LINE 1 – TV
IN
OUT
AERIAL
SYSTEM CONNECTOR
If the satellite tuner can output RGB signals
This recorder accepts RGB signals. If the satellite
tuner can output RGB signals, connect the TV
SCART connector on the satellite tuner to the
LINE 3/DECODER jack, and set "Line3 Input" of
"Scart Setting" to "Video/RGB" in "Video" setup
(page 96). Note that this connection and setup
disable the SMARTLINK function. If you want to
use the SMARTLINK function with a compatible
set top box, see the instructions supplied with the
set top box.
If you want to use the Synchro Rec function
This connection is necessary to use the Synchro-
Recording function. See "Recording from
connected equipment with a timer (Synchro Rec)"
on page 57.
Set "Line3 Input" of "Scart Setting" in "Video"
setup (page 96) according to the specifications of
SCART cord
(not supplied)
to i LINE 3/DECODER
LINE 1 - TV
LINE 3/
DECODER
R-AUDIO-L
VIDEO
S VIDEO
R-AUDIO-L
VIDEO
LINE 4 IN
LINE OUT
TV
to SCART input
Satellite tuner, etc.
Y
P
B
/ C
B
S VIDEO
P
/ C
R
R
~
COMPONENT
VIDEO OUT
DVD recorder
your satellite tuner. See your satellite tuner's
instructions for more information.
If you are using a B Sky B tuner, be sure to
connect the tuner's VCR SCART jack to the LINE
3/DECODER jack. Then set "Line3 Input" of
"Scart Setting" according to the specifications of
the VCR SCART jack on your satellite tuner.
Notes
• Do not set "Line3 Input" of "Scart Setting" in "Video"
setup to "Decoder."
• Synchro-Recording does not work with some tuners.
For details, see the tuner's operating instructions.
• If you disconnect the recorder's mains lead, you will
not be able to view the signals from the connected
tuner.
• DTS audio signals of CDs/DVDs are output only to this
speaker system, not to the LINE jacks.
AC IN
,continued
31

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Dar-rh1000

Tabla de contenido