Disc Settings/Factory Settings (Options) - Sony DAR-RH7000 Manual De Instrucciones

Disc Settings/Factory
Settings (Options)
The "Options" setup allows you to set up other
operational settings.
1
Press SYSTEM MENU while the recorder is
in stop mode.
2
Select "SETUP," and press ENTER.
3
Select "Options," and press ENTER.
The "Options" setup appears with the
following options. The default settings are
underlined.
SETUP
Format DVD-RW :
Settings
Video HDD Bilingual Rec. :
DVD Bilingual Rec. :
Audio
Features Dimmer :
Power Save :
Speaker
Options Auto Display :
Factory Setup
Easy Setup
Format DVD-RW (DVD-RW only)
When a new unformatted DVD-RW is inserted,
the recorder automatically starts formatting in VR
mode or Video mode, whichever is selected
below.
VR
Automatically formats the disc in
VR mode.
Video
Automatically formats the disc in
Video mode.
HDD Bilingual Rec. (HDD only)
Selects the sound to be recorded on the HDD.
Main Records the main sound for the
bilingual programme.
Sub
Records the sub sound for the
bilingual programme.
Main+Sub
Records the main and sub sounds
for the bilingual programme.
VR
Main
Main
Normal
Off
On
Note
If you set the recording mode to be changed while
dubbing from a DVD to the HDD, the sound recorded in
the source (DVD) is applied regardless of this setting.
DVD Bilingual Rec. (for all recordable discs
except DVD-RW in VR mode)
Selects the sound to be recorded on the recordable
disc. This setting is not necessary when recording
on DVD-RWs (VR mode) that record both the
main and sub sounds.
Main Records the main sound for the
bilingual programme.
Sub Records the sub sound for the
bilingual programme.
Dimmer
Adjusts the lighting of the front panel display.
Normal Bright lighting.
Power Low lighting. Turns off the
Save lighting when the power is off.
Note
When "Power Save" in "Options" setup is set to "On,"
the front panel display is turned off during standby
regardless of this setting.
Power Save
Selects whether this recorder is in power save
mode when the power is turned off (standby).
On Sets to power save mode. The
front panel display is off when the
recorder is in standby.
Off
Does not set to power save mode.
Normally, select this.
Note
Power Save mode does not function in the following
cases, even when "Power Save" is set to "On
– Synchro Recording is set.
– There is a timer setting with "PDC/VPS" set to "On"
in the Timer List.
.
"
,continued 103