Rolling The Cot - Stryker Power-PRO IT Manual De Uso Y Mantenimiento

Ocultar thumbs Ver también para Power-PRO IT:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

ROLLING THE COT

When rolling the cot:
• Position an operator at the foot end and one at the head end of the cot at all times when rolling the cot with a
patient on it.
• Approach door sills and/or other low obstacles squarely and lift each set of wheels over the obstacle separately.
WARNING
• Never leave a patient unattended on the cot or injury could result. Hold the cot securely while a patient is on the
product.
• Never apply the optional wheel locks while a patient is on the cot. Tipping could occur if the cot is moved while the
wheel lock is applied, resulting in injury to the patient or operator and/or damage to the cot.
• Hydraulically raising or lowering the cot may temporarily affect electronic patient monitoring equipment. For best
results, patient monitoring should be conducted when the cot is idle.
• High obstacles such as curbing, steps or rough terrain can cause the cot to tip, possibly causing injury to the
patient or operator.
• Transporting the cot in lower positions reduces the potential of a cot tip. If possible, obtain additional assistance or
take an alternate route.
www.stryker.com
Operation Guide
6516-109-005 REV B
Return To Table of Contents
1-31
English

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

6516

Tabla de contenido