Publicidad
CHK
CONTROL SYSTEM
ADJ
(4) Check that full-open position mark
on the accelerator cam is aligned with
the center of the cam roller
(5) If they are not aligned, adjust the joint
link length
tion mark
the cam roller
(6) Check that full-open stopper
carburetor control link is in contact with
the stopper on the carburetor body
NOTE:
After adjustment, open and close the throt-
tle repeatedly for several times to reassure
that the full-open position of the accelerator
cam and the positioning of the carburetor
control link stopper are correct.
3-8
b
.
c
until the full-open posi-
a
comes to the center of
b
.
d
E
a
of the
e
.
Publicidad
Capítulos
