Emergency Starting - TOHATSU MFS 40A Manual Del Propietário

40
ENGINE OPERATION
6. Check the cooling water from cooling
water check port.
ENOM00042-A

Emergency starting

ENOW00099-A
WARNING
When the emergency starter rope is used
for starting engine;
Start in gear protection does not work.
Be sure to shift is at neutral position.
Otherwise the engine will move the boat
immediately and cause personal injury.
Be careful that your clothes or other
items do not get caught in the rotating
engine parts.
To prevent accident and injury by rotat-
ing parts, do not re-attach flywheel
cover and the top cowl after the engine
has been started.
Do not pull starter rope if any bystander
is behind. The action can injure the
bystander.
Attach engine stop switch lanyard to
clothing or any part of body like arm
before starting engine.
1. Remove the top cowl.
ENOF00868-0
2. Remove the flywheel cover.
1. Bolt
2. Rubber grommet
3. Be sure to install the stop switch lock
4. Insert the knotted end of the starter
2
1
2
to the stop switch, and attach the stop
switch lanyard securely to the operator
or to the operator's PFD (Personal Flo-
tation Device.)
rope into the notch in the flywheel and
wind the rope around the flywheel sev-
eral turns clockwise.
ENOF00872-0
ENOF00873-0