Drive Chain Inspection - Yamaha WR400F 1999 Manual De Servicio

Tabla de contenido

Publicidad

SPROCKETS INSPECTION/DRIVE CHAIN INSPECTION
EC368000
SPROCKETS INSPECTION
1. Inspect:
Sprocket teeth a
Excessive wear → Replace.
NOTE:
Replace the drive, driven sprockets and drive
chain as a set.
EC369002

DRIVE CHAIN INSPECTION

1. Remove:
Master link clip
Joint 1
O-rings 2
Drive chain 3
2. Clean:
Drive chain
Place it in kerosene, and brush off as
much dirt as possible. Then remove the
chain from the kerosene and dry the
chain.
3. Measure:
Drive chain length (10 links) a
Out of specification → Replace.
Drive chain length (10 links):
Limit: 150.1 mm (5.91 in)
4. Check:
Drive chain stiffness
Clean and oil the chain and hold as
illustrated.
Stiff → Replace drive chain.
3 - 32
INSP
ADJ

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Wr400m 1999

Tabla de contenido