Yamaha WR400F 1999 Manual De Servicio página 194

ENGINE OIL REPLACEMENT
6. If the oil filter is to be replaced during this
oil change, remove the following parts
and reinstall them.
Replacement steps:
Remove the exhaust pipe.
Remove the oil filter cover 1 and oil filter
element 2.
Check the O-rings 3, if cracked or dam-
aged, replace them with a new one.
Install the oil filter element and oil filter
cover.
7. Install:
8. Install:
9. Fill:
3 - 16
Oil filter cover:
10 Nm (1.0 m • kg, 7.2 ft • lb)
Oil strainer (frame) 1
90 Nm (9.0 m · kg, 65 ft · lb)
Plain washer 2 New
Engine oil hose 3
Engine oil hose clamp 4
Engine skid plate
Gaskets
New
Oil filter drain bolt
10 Nm (1.0 m · kg, 7.2 ft · lb)
Drain bolt (crankcase)
20 Nm (2.0 m · kg, 14 ft · lb)
Drain bolt (frame)
23 Nm (2.3 m · kg, 17 ft · lb)
Oil tank (frame)
Oil quantity:
Total amount:
1.7 L (1.50 Imp qt, 1.80 US qt)
Periodic oil change:
1.5 L (1.32 Imp qt, 1.59 US qt)
With oil filter replacement:
1.6 L (1.41 Imp qt, 1.69 US qt)
INSP
ADJ