Yamaha WR400F 1999 Manual De Servicio página 494

FRONT BRAKE AND REAR BRAKE
5 - 24
3. Pass the brake hose through the cable
guide 1, then through the guide a on
the protector 2.
4. Install:
Copper washer 1
Brake hose 2
Union bolt 3
30 Nm (3.0 m · kg, 22 ft · lb)
WARNING
Always use new copper washers.
CAUTION:
Install the brake hose so that it contacts
the master cylinder projection a and that
its bent portion b faces downward.
EC5A5500
Rear brake hose
1. Install:
Copper washer 1
Brake hose 2
Copper washer 3
Union bolt 4
30 Nm (3.0 m · kg, 22 ft · lb)
WARNING
Always use new copper washers.
CAUTION:
When installing the brake hose, first align
the tooth a on the copper washer 1 with
the projection b on the master cylinder.
Then, align the pipe portion on the end of
the brake hose with the tooth c on the cop-
per washer 1 and tighten the union bolt.
CHAS
New
New
New