Yamaha WR400F 1999 Manual De Servicio página 534

HANDLEBAR
NOTE:
The "ENGINE STOP" button, clutch lever
holder and clamp should be installed accord-
ing to the dimensions shown.
Pass the "ENGINE STOP" button lead in the
middle of the clutch holder.
9. Install:
Clutch cable 1
NOTE:
Apply the lithium soap base grease on the
clutch cable end.
10. Adjust:
Clutch lever free play
Refer to "CLUTCH ADJUSTMENT"
section in the CHAPTER 3.
11. Insert the end of the fuel breather hose
1 into the hole of the steering shaft.
5 - 44
CHAS