Yamaha WR400F 1999 Manual De Servicio página 460

FRONT WHEEL AND REAR WHEEL
1
9. Install:
Hose cover 1
Plain washer 2
Bolt [hose cover (M8)] 3
Bolt [hose cover (M6)] 4
10. Install:
Trip meter cable 1
EC525112
Rear wheel
1. Install:
Bearing (right) 1
Circlip 2
Spacer 3
Bearing (left) 4
Oil seal 5
NOTE:
Apply the lithium soap base grease on the
bearing and oil seal lip when installing.
Install the bearing with seal facing outward.
Use a socket that matches the outside diam-
eter of the race of the bearing.
Right side of bearing shall be installed first.
Install the oil seal with its manufacture's
marks or numbers facing outward.
CAUTION:
Do not strike the inner race of the bearing.
Contact should be made only with the outer
race.
5 - 7
CHAS
16 Nm (1.6 m · kg, 11 ft · lb)
7 Nm (0.7 m · kg, 5.1 ft · lb)
New
New