DAB E.sybox Instrucciones Para La Instalación Y El Mantenimiento página 115

1. No water.
2. Pump not primed.
The display
Red: on
3. Setpoint not reach-
shows White: on
able with the set
BL Blue: off
RM value
The display
Red: on
1. Faulty pressure
shows White: on
sensor.
BP1
Blue: off
1. Excessive absorp-
The display
Red: on
tion.
shows White: on
2. Pump blocked.
OC Blue: off
1. Supply voltage
The display
Red: on
too low.
shows White: on
2. Excessive drop in
PB Blue: off
voltage on the line.
The display
One or more devices
shows:
Red: off
have sensitive param-
Press + to White: on
eters not aligned.
propagate
Blue: off
this config
1-2. Prime the pump and check
whether there is air in the pipe.
Check whether the suction or any
filters are blocked.
3. Set a RM value that allows the
setpoint to be reached.
1. Contact the assistance centre.
1. Fluid too dense. Do not use
the pump for fluids other than
water.
2. Contact the assistance centre.
1. Check the presence of the cor-
rect supply voltage.
2. Check the section of the power
supply cables.
Press the + key on the device
which we are sure has the most
recent and correct configuration of
the parameters.
13 - DISPOSAL
This product or its parts must be disposed of in an environment-friendly
manner and in compliance with the local regulations concerning the envi-
ronment; use public or private local waste collection systems.
14 - GUARANTEE
Any use of faulty material or manufacturing defects of the appliance will
be eliminated during the guarantee period contemplated by the law in
force in the country where the product is purchased, by repair or replace-
ment, as we decide.
The guarantee covers all substantial defects that can be assigned to
manufacturing faults or to the material used if the product has been used
correctly, in accordance with the instructions.
The guarantee is void in the following cases:
• attempts to repair the appliance,
• technical alterations to the appliance,
• use of non original spare parts,
• tampering.
• inappropriate use, for example industrial use.
Excluded from the guarantee:
• parts subject to rapid wear.
When making a request under guarantee, apply to an authorised techni-
cal assistance service, presenting proof of purchase of the product.
GB
ENGLISH
115