Adjusting The Volume; Reinforcing The Bass Sound; Adjusting Bass And Treble Sounds - JVC UX-G66 Manual De Instrucciones

• To save the power consumption, make use of Dimmer
feature (see page 10).
• To switch off the power supply completely, unplug the
AC power cord from the AC outlet. STANDBY/ON lamp
goes off.
When you unplug the AC power cord
or if a power failure occurs
The clock is reset to "0:00" right away, while the
tuner preset stations will be erased in a few days.

Adjusting the Volume

You can adjust the volume level only while the system is
turned on.
• Rotate VOLUME dial clockwise to increase the volume
level or counterclockwise to decrease it.
• Using VOLUME dial, rotating quickly makes a large
change in the volume level while rotating slowly makes a
step-by-step change.
• When using the remote control, press VOLUME + button
to increase the volume level or press VOLUME – button
to decrease it.
The volume level (from 0 to 50) appears in the display
window as follows:
For private listening
Connect a pair of headphones to the PHONES jack.
No sound comes out of the speakers. Be sure to turn
down the volume level before connecting or putting
headphones.
PHONES jack
DO NOT turn off the system with the volume level set
to an extremely high level; otherwise, the sudden blast
of sound can damage your hearing, speakers and/or
headphones when you turn on the system or start
playing any source.
REMEMBER you cannot adjust the volume level while
the system is turned off.
OPEN/CLOSE
STANDBY/ON
M I C R O C O M P O N E N T S Y S T E M U X - G 6 6
AUX
FM/AM
MULTI JOG MOS - FET VOLUME
1 B I T P • E • M D • D • C O N V E R T E R
PHONES
COMPACT
DIGITAL AUDIO
DOLBY B NR
REC PAUSE
AUTO
REVERSE
REC

Reinforcing the Bass Sound

The richness and fullness of the bass sound is maintained
regardless of how low you set the volume level.
You can use this effect only while listening sources.
• To get the effect, press ACTIVE BASS EX. button on
the remote control, and its indicator lights in the display
window.
• To cancel the effect, press the button again so that the
indicator goes off.

Adjusting Bass and Treble Sounds

You can adjust bass and treble sound effects with the remote
control, conforming to your preference and acoustic
surroundings.
You can use this effect only while listening sources.
To adjust the bass
1
Press BASS button.
The current level settings shortly appears as follows:
To exit from the level setting, press the button again.
2
Press UP/DOWN button to adjust the level.
• Press UP button to increase the bass tone level.
• Press DOWN button to decrease the bass tone level.
The bass level can be adjusted in seven steps from –3
through 0 to +3 (step "0" makes no effect).
To cancel the effect, adjust the level to "0."
To adjust the treble
1
Press TREBLE button.
The current level settings shortly appears as follows:
To exit from the level setting, press the button again.
2
Press UP/DOWN button to adjust the level.
• Press UP button to increase the treble tone level.
• Press DOWN button to decrease the treble tone level.
The treble level can be adjusted in seven steps from –3
through 0 to +3 (step "0" makes no effect).
To cancel the effect, adjust the level to "0."
Continued
12