Recording Onto A Tape; Manual Recording Onto A Tape - JVC UX-G66 Manual De Instrucciones

Recording onto a Tape

TITTLE/EDIT ENTER
DISPLAY
/CHARA. CANCEL
UP
< >
SET
DOWN
MD AUX
TAPE CD
FM/AM
VOLUME
Two types of cassette tapes can be recorded onto, including
normal (Type I), and High position (Type II) tapes. These
types are identified automatically by the cassette deck unit
and the recording level is also corrected automatically.
Neither volume level nor sound effects during playback does
affect to the recording.
IMPORTANT:
• It may be unlawful to record or play back copyrighted
material without the consent of the copy right owner.

Manual Recording onto a Tape

1
Select one of the recording sources — FM/AM
broadcasts, CD, or other external equipment.
• To record FM/AM broadcasts, receive a station with
Tuner unit.
• To record a CD or its tracks programed, set the play-
pause mode for CD unit.
• To record from an external equipment connected to
ANALOG IN jacks, prepare it as required.
Make sure to select a source first, otherwise you
cannot use recording function.
AUX
TAPE ` (playback)
CD 6 (play/pause)
7 (stop)
FM/AM
REC PAUSE DOLBY B NR
2
3
Buttons behind the sliding panel
DISPLAY 4 ¢
SET
/CHARA. CANCEL ENTER
SET
π (auto reverse)
DOLBY B NR
REC PAUSE
AUTO
REVERSE
REC
Tape operations indicators
Place a recordable tape with the side you want to
record facing up.
Press 0 (open/close) button on the cassette deck unit to
open the tape tray; place a tape on it; and press 0 (open/
close) button again to close it.
• You cannot record onto the tape without a protect tab.
When using that tape, cover the hole for desired side
with adhesive tape.
\
Press REC PAUSE button on the cassette deck unit.
REC
REC indicator
PLAY REC TITLE CLOCK
MODE MODE /EDIT /TIMER
REC MODE
0 (open/close)
` (playback) 7 (stop)
22