Legal Information; Avant-Propos; Description Du Produit; Tailles Disponibles - Ottobock Free Walk Instrucciones De Uso

15) Insert the lock axis from medial into the orthosis knee joint and slide on the retaining ring.
16) Bring the orthosis ankle joint forward to the stop and thread the steel cable from above
through the orthosis ankle joint.
17) Insert the upper part of the orthosis with new bearing washers into the orthosis knee joint.
18) Slide the knee axis from the medial side into the orthosis knee joint and slide on the retaining
ring.
→ The orthosis knee joint now has to be locked.
19) Insert the pressure ball into the orthosis ankle joint.
20) Apply Loctite® 241 to the locking screw and install it. Do not tighten the locking screw.
21) Keep slight tension on the steel cable by hand and lift the lock by about 1 mm. Tighten the
locking screw at the same time (torque value0.5 Nm ).
→ The lock has to unlock due to dorsiflexion in the orthosis ankle joint and extension in the
orthosis knee joint.
22) Shorten the pull cable. The pull cable has to project 2 cm out of the ankle joint.
9 Disposal
Dispose of the product in accordance with national regulations.

10 Legal information

All legal conditions are subject to the respective national laws of the country of use and may vary
accordingly.
10.1 Liability
The manufacturer will only assume liability if the product is used in accordance with the descrip­
tions and instructions provided in this document. The manufacturer will not assume liability for
damage caused by disregarding the information in this document, particularly due to improper
use or unauthorised modification of the product.
10.2 CE conformity
This custom product meets the requirements of the European Directive 93/42/EEC for medical
devices according to Annex VIII. This product has been classified as a class I device according to
the classification criteria outlined in Annex IX of the directive. The product does not bear the CE
marking since it is a custom fabrication.

1 Avant-propos

INFORMATION
Date de la dernière mise à jour : 2018-10-17
► Veuillez lire attentivement l'intégralité de ce document avant d'utiliser le produit.
► Respectez les consignes de sécurité afin d'éviter toute blessure et endommagement du pro­
duit.
► Apprenez à l'utilisateur à bien utiliser son produit et informez-le des consignes de sécurité.
► Conservez ce document.
Les instructions d'utilisation vous donnent des informations importantes sur l'usinage du système
d'orthèse Free Walk 170K1=80 et 170K1=120.

2 Description du produit

2.1 Tailles disponibles

L'orthèse est disponible en deux tailles différentes. Le choix de la taille s'effectue en fonction du
poids du patient.
20
Français