Section 11 Connecting To An External Computer - Abaxis VETSCAN VS2 Manual Del Usuario

Section 11
Connecting to an
External Computer
The VetScan VS2 Analyzer is equipped to transmit patient and
control results in 8-bit, ASCII (American Standard Code for
Information Interchange) format to a computer through a USB
port. To receive the results from the VS2, the computer requires
terminal emulation software, such as HyperTerminal, which is
included with Windows 95 and higher. The computer also
requires driver software to communicate with the VS2.
The results can be captured to a text file to be viewed with most
word processing, spreadsheet, and database applications. This
section describes the transmission specifications, hardware con-
nections, and use of HyperTerminal to capture results to a text
file.
Note: Veterinary management software can also interface
with the VS2 to collect results. Since each such
installation varies, contact your software supplier
for more information.
Connecting to an External Computer
11-1