Selecting Units - Abaxis VETSCAN VS2 Manual Del Usuario

5.9

Selecting Units

You can select either Common Units, such as mg/dL, or SI Units (Systeme International), such as
mmol/L, to report results.
1. In the Home screen, touch the Settings icon.
2. Touch the More Settings icon.
3. Touch the Units Settings icon.
4. Set the units used for all analytes, a particular analyte, or a class of analytes (electrolytes,
enzymes, minerals, or proteins) as follows.
To set units for all analytes:

a.
b.
5-16
Touch
All Analytes
Select the units to use for all analytes:
or .
Non SI SI
Configuring the Analyzer
.