Abaxis VETSCAN VS2 Manual Del Usuario página 106

5. Open the Win2K_XP folder.
6. Double-click the file Abaxis Driver
Setup.exe.
7. Installation then begins. When the installer
finishes, click
8. Use the USB cable to connect the VS2 to any available USB port on the computer.
9. Click
Start > Control Panel > System
10. Click
Device Manager
Blood Chemistry Analyzer.
Note: If the analyzer does not appear in the device list, do not reinstall the driver. Unplug the
USB cable from the computer, then reinsert it. Check the device manager again.
11-4
.
OK
, then click the "
Connecting to an External Computer
, then click the
Hardware
" before
+ Ports (COM & LPT)
tab.
. Look for Abaxis