7.
Enter an alternate ID (up to 14 characters), then touch
8.
The analyzer checks the rotor type, then begins processing the sam-
ple with no further input.
9.
The analyzer indicates when the sample is finished processing, then
automatically prints the results of the analysis.
If the results do not print automatically, they can be recalled from
memory and printed — see
10. Touch
Open
CAUTION:
Dispose of the rotor according to the lab's biohazard procedures.
11. When finished, touch
"Searching Results" on page
to open the rotor drawer, and remove the reagent rotor from the drawer.
to close the drawer.
Close
Calibration and Quality Control
.
Done
6-3.
7-5