Abaxis VETSCAN VS2 Manual Del Usuario página 35

8. Patient identification numbers may be written in the
space indicated at right. Do not write anywhere else on
the rotor or on the bar code ring.
9. Hold the reagent rotor by its edges and keep it in a flat
position while carrying it to the analyzer.
Note: The test run must begin within 10 minutes of placing
the sample in the reagent rotor.
Sample volume should not exceed 120
10. Touch
Analyze
The following messages are
then displayed:
on the touchscreen to open the rotor drawer.
Test Procedure and Results

L
Write patient
ID here
4-7