Changing Date And Time - Abaxis VETSCAN VS2 Manual Del Usuario

5.7

Changing Date and Time

The date and time is factory preset to Pacific Time. Reset the date and time as needed when setting up
the analyzer, and periodically thereafter.
1. In the Home screen, touch the Settings icon.
2. Touch the Date and Time icon.
3. Use the controls to set the time:
Use the up (

hour and minutes.
Touch

formats.
Touch

4. Touch
Date
Note: If the time entered is invalid, an error message appears — touch
rect time, then touch
5. Use the up (
month, and year.
6. Touch
Done
Note: If the date entered is invalid, an error message appears — touch
Continue
5-14
) and down (

to switch between 12- and 24-hour time
12/24 Hour
to set the seconds to zero.
Zero Sec.
when the time is set.
.
Done
 ) and down ( 
.
, set the correct date, then touch
Configuring the Analyzer
) arrow keys to adjust the

) arrow keys to adjust the day,
.
Done
, set the cor-
Continue