Iqc Codes; Using Iqc Codes For Troubleshooting - Abaxis VETSCAN VS2 Manual Del Usuario

Appendix A

iQC Codes

A.1 Using iQC Codes for
Troubleshooting
The analyzer can display warnings, iQC codes, and messages to
help diagnose and resolve potential problems.
iQC (Intelligent Quality Control) is a series of automatic checks
that verify the chemistry, optics, and electronic functions of the
analyzer during each run. This ensures that operators in a wide
range of environments report only accurate and reliable results.
iQC automatically suppresses a single chemistry — or the entire
panel — if it detects uncharacteristic performance, and immedi-
ately alerts the operator to any problems.
If the analyzer displays an iQC code, find the code in the follow-
ing pages, and try the suggested solutions in the order presented.
Note: If the iQC code is not listed or if you cannot correct
a particular problem, record the iQC number or
print the report, and contact Abaxis Technical Sup-
port, 24 hours a day, 7 days a week, at
1-800-822-2947, or send a fax to 1-877-900-9333.
iQC Codes
A-1