Annovi Reverberi CAR 50 Manual De Uso página 50

3. Connect the pressure regulating valve (45) delivery fitting or tap (49) to the lance fitting (7) with hose (5)
and secure it with the supplied clamps.
EN
Make sure the clamps
are properly installed
and that the delivery
and bypass hoses are
tight and securely fitted, so
that they cannot slip off the
fittings when pressurised or
leak polluting product into
the environment.
If the electric pump motor has no power cord, it must be hooked up by a qualified electrician as re-
quired by law. Before starting the electric pump, make sure that the electrical equipment ratings match
the electric motor nameplate ratings (the nameplate is on the motor's casing). In particular, the power
voltage should not differ by more than ± 5% from the nameplate rating. Make sure to ground the system and
fit a fuse and magnetic circuit breaker of sensitivity no greater than 30 mA; the trolley's electrical system must
be equipped with a omni-pole breaker with minimum contact gap of 3 mm. Do not use unsuitable power cord
extensions, and do not fit adapters or reducers between the power plug and the power socket.
50
7
Annovi Reverberi S.p.A. Via Martin Luther King, 3 - 41122 Modena - Italy
5
EN
49
D