Information On The Power Supply/Battery Charging - Ottobock Meridium 1B1 Instrucciones De Uso

NOTICE
Improper product care
Damage to the product due to the use of incorrect cleaning agents.
► Only clean the product with a damp cloth and mild soap (e.g. 453H10=1 Ottobock Der­
maClean).
NOTICE
Mechanical damage to the product
Change in or loss of functionality due to damage.
► Use caution when working with the product.
► If the product is damaged, check it for proper function and readiness for use.
► In case of changes in or loss of functionality, do not continue using the product (see
"Signs of changes in or loss of functionality during use" in this section).
► Take any necessary measures (e.g. repair, replacement, inspection by the manufac­
turer's customer service, etc.).
INFORMATION
When exoprosthetic components are used, the use of control functions which are performed
hydraulically or movement of the component in the footshell can cause noise. This kind of noise
is normal and unavoidable. It generally does not cause any problems. If movement noise
increases noticeably during the lifecycle of the component, the component should be immedi­
ately inspected by authorised qualified Ottobock personnel.
Signs of changes in or loss of functionality during use
Reduced spring effect or decreased forefoot resistance are indications of loss of functionality.

4.4 Information on the Power Supply/Battery Charging

CAUTION
Charging the prosthesis without taking it off
> Falling due to walking and getting caught on a connected battery charger.
> Falling due to unexpected behaviour of the prosthesis because of changed damping
behaviour.
► For safety reasons, remove the prosthesis prior to charging it.
CAUTION
Charging the product with damaged power supply unit/charger/charger cable
Falling due to unexpected behaviour of the product caused by insufficient charging.
Check the power supply unit, charger and charger cable for damage before use.
►
► Replace any damaged power supply unit, charger or charger cable.
NOTICE
Use of incorrect power supply unit/battery charger
Damage to product due to incorrect voltage, current or polarity.
► Use only power supply units/battery chargers approved for this product by Ottobock
(see instructions for use and catalogues).
Ottobock | 41