Setting The Heel Height With The Cockpit App; Setting Heel Height Using Remote Control - Ottobock Meridium 1B1 Instrucciones De Uso

8.1.2 Setting the heel height with the cockpit app

Product
MyModes
Heel Height
Functions
Settings
Status
General
Manage components
Imprint/Info

8.1.3 Setting heel height using remote control

INFORMATION
This function is not available while the battery of the prosthesis is being charged. The
appears in front of the "Status" menu option.
2
1) Use the , keys to select the menu option "Status" in the main menu and confirm this with
the key.
2) Use the , keys to select the "Heel Height" menu option.
3) Stand on a level surface and distribute weight evenly on both feet.
4) Press the key to start the heel height measurement.
→ A confirmation signal will sound to indicate that the new heel height was successfully stored.
INFORMATION: If there is no feedback (e.g. beep signal), this indicates that the new
heel height could not be stored. Repeat the heel height measurement.
52 | Ottobock
1) Once the component is connected and in the desired mode,
tap the symbol in the main menu.
→ The navigation menu opens.
change
2) Tap the "Heel Height" menu option.
3) Follow the on-screen instructions.
2. Golf
4) Tap the "Set the heel height" option.
5) Follow the subsequent instructions on the screen.
3 4
symbol