Cleaning And Servicing The Valve System - Aventics CL03 Instrucciones De Servicio

AVENTICS | CL03, CL03-XL | R402000141–BAL–001–AF

10.2 Cleaning and servicing the valve system

Damage due to solvents and aggressive cleaning agents!
The surface and seals may be damaged if solvents or
aggressive cleaning agents are used.
Only use solvents or detergents in low concentration
and for short periods of exposure.
Do not exceed the conditions of the protection class
of the unit.
The CL03 and CL03-XL valve systems are designed for use
in wet zones. After correct assembly, they can be cleaned under
high pressure and at high temperatures (IP69K conditions).
The valve systems are resistant against most common cleaning
agents in low concentrations for short term exposure.
For detailed information, contact the supplier of the solvents
or cleaning detergents, or contact AVENTICS (see back cover
for address).
Maintenance and Care
CAUTION
97