Pentair INTELLIPOOL AUTOMATION Guía De Instalación Y Usuario página 3

Customer Support : HERENTALS, BELGIUM (8:30 A.M. to 4:30 P.M.) CET
IMPORTANT SAFETY INSTRUCTIONS READ AND FOLLOW ALL INSTRUCTIONS SAVE THESE INSTRUCTIONS
© 2012 Pentair International LLC, All rights reserved
Trademarks and disclaimers: IntelliFlo® and Pentair® are trademarks and/or registered trademarks of Pentair and/or its affiliated companies. Unless noted, names and brands of others that may be used in this
document are not used to indicate an affiliation or endorsement between the proprietors of these names and brands and Pentair. Those names and brands may be the trademaks or registered trademarks of those
parties or others.
Waste treatment of electronic devices treatment: The crossed-out dustbin symbol placed on the main component parts of the product indicates that it must not be thrown out with household
waste. It must be dropped off at an appropriate collection point for recycling of electronic devices (information available your local waste treatment company).
This product contains potentially dangerous substances that may have adverse effects on the environment and human health.
Safety advice on batteries: Batteries may contain dangerous substances, so they must not be thrown out into the dustbin, or be opened, burned or be recharged, as this may cause explosion.
Handle a leaking battery with gloves. Remove the batteries in case of prolonged periods out of use.
Security advices about the buffer solution for pH probe calibration: It must be kept away from children, ensuring the bottles are properly closed, stored in a dry and ventilated area and
does not expose them to temperatures below zero. pH 4 etalon solution is acid.
DANGER - SERIOUS BODILY INJURY OR DEATH CAN RESULT IF THIS PRODUCT IS NOT INSTALLED AND USED CORRECTLY
DANGER - INSTALLERS, POOL OPERATORS AND POOL OWNERS MUST READ THESE WARNINGS AND ALL INSTRUCTIONS BEFORE
USING THIS PRODUCT.
WARNING - Most countries regulate the construction, installation, and operation of public pools and spas, and the construction of residential pools and spas. It is important to
comply with these codes, many of which directly regulate the installation and use of this product. Consult your local building and health codes for more information.
IMPORTANT NOTICE
Attention Installer: This Installation and User's Guide contains important information about the installation, operation and safe use of this product.
This Guide should be given to the owner and/or operator of this product.
WARNING - Before installing this product, read and follow all warning notices and instructions in this guide. Failure to follow warnings and instructions can result in severe
injury, death, or property damage. Please refer to www.pentairpooleurope.com for more information related to this products.
DANGER - RISK OF ELECTRICAL SHOCK OR ELECTROCUTION
BEFORE WORKING ON INTELLIPOOL: Always disconnect power to the IntelliPool® controller at the circuit breaker before servicing. Failure to do so could result in death or
serious injury to service person, pool users or others due to electric shock.
DANGER - BE SURE TO DISCONNECT ALL SUPPLY CONNECTIONS BEFORE SERVICING INTELLIPOOL®. AC Power may be supplied to the relay terminals from other
sources.
WARNING –Connect IntelliPool® to a ground-fault interrupter-circuit (GFCI). If this system is used to control underwater lighting fixtures, a ground-fault interrupter (GFCI)
must be provided for these fixtures. Conductors on the load side of the ground-fault circuit-interrupter shall not occupy conduit, junction boxes or enclosures containing other
conductors unless such conductors are also protected by a ground-fault circuit-interrupter. Refer to local codes for details.
WARNING - This product must be installed by a licensed or certified electrician or a qualified pool professional. All applicable local installation codes and ordinances must also
be adhered to. Improper installation will create an electrical hazard which could result in death or serious injury to pool users, installers or others due to electrical shock, and
may also cause damage to property.
DANGER - DO NOT PERMIT CHILDREN TO OPERATE THIS EQUIPMENT
WARNING - When mixing acid with water, ALWAYS ADD ACID TO WATER. NEVER ADD WATER TO ACID.When adding any chemical to the pool, be sure to follow the
manufacturer's instructions thoroughly.
DANGER - DO NOT MIX SODIUM HYPOCHLORITE AND MURATIC ACID
WARNING - CHEMICAL BURN HAZARD: Make sure all pumps are switched off at the main circuit breakers at the house before drilling into any pipes. Securely fasten all
electrical, water and chemical lines. Locate chemical feed pumps and chemical storage tanks in a safe and secure area.
WARNING - Strictly follow the acid manufacturers safety and handling protocols including hand, body and eye protection when transferring or handling acid. Safety
precautions should be used when handling Muriatic acid to control pH water levels. Muriatic acid can cause serious body injury and damage pool equipment. Extra care must
be taken when installing, maintaining and operating acid pump feed systems. Acid is dangerous to handle and should be properly contained, transported, poured, stored, and
dispensed.
WARNING - Check the pH and sanitizer levels of the water before using the pool and make sure filtration is not obstructed.
WARNING - Periodically use an independent pH and Chlorine test kit to verify that pH and chlorine is at a safe level. If the pH and Oxidation Reduction Potential (ORP) or
conductivity sensors are broken, depleted or dirty with oils, lotions, or other contaminants, they can report inaccurate results to the system causing incorrect water chemistry,
which could harm people or equipment.
WARNING - Check the IntelliPool® display each day to ensure there are no Alarm messages.
DANGER - Water temperature in excess of 100° F (37.7° C) may be hazardous to your health. Prolonged immersion in hot water may induce hyperthermia. Hyperthermia
occurs when the internal temperature of the body reaches a level several degrees above normal body temperature of 38° C (100° F ). Effects of hyperthermia include: (1)
Unawareness of impending danger. (2) Failure to perceive heat. (3) Failure to recognize the need to leave the spa. (4) Physical inability to exit the spa. (5) Fetal damage in
pregnant women. (6) Unconsciousness resulting in danger of drowning. The use of alcohol, drugs, or medication can greatly increase the risk of fatal hyperthermia in hot tubs
and spas.
WARNING - HEATER: The IntelliPool® automation control system is intended to control heaters with a high temperature limit switch(s) safety circuit ONLY. Failure to do so
may cause property damage or personal injury.
WARNING - Do not use this product to control an automatic pool cover. Swimmers may become entrapped underneath the cover.
WARNING - For units intended for use in other than single-family dwellings, additional safety equipment might be required in order to be compliant with local regulations.
CAUTION - Except for remote controls, install components at a minimum of five 1.5m (5 ft) from the inside wall of the pool and spa.
CAUTION - This product is intended for use in swimming pool applications only.
Website: www.pentairpooleurope.com
- This document is subject to change without notice
1