Pentair INTELLIPOOL AUTOMATION Guía De Instalación Y Usuario página 7

Internet relay - Your pool accessible 24/24 on www.intellipool.eu
The internet relay allows internet to keep in touch with your pool even when your home computer is shut down. What ever your type of computer
(PC or Mac) you have access to your data in real time and can also work on settings and controls.
Simply plug the internet relay to your internet router and the connection to the server Pentair is automatic. After you create your free account on
www.intellipool.eu, you connect to your system in few minutes. Commands to Control center ordered via internet are effective in seconds.
1 - Connect the Ethernet cable to the Ethernet port of your internet relay. Then connect the other end of Ethernet cable to an available Ethernet
port on your router or ADSL modem. The Ethernet cable can be replaced by an equivalent cable with a maximum length of 100m. If you do not
have a free Ethernet port on your router or ADSL modem, you should get an Ethernet switch to connect your system permanently.
2 - Connect the power cord and connect the power transformer to an AC outlet.
The internet relay is automatiquely configured than internet provided that the DHCP server of your internet router is enabled (in the vast majority
of cases, the DHCP server is enabled by default when you install your internet router). This function is accessible via the menu system of your
Internet router, refer to your Internet service provider for more details.
Verify the correct operation of the internet relay using the led indicator on the device (see illustration below).
Data transmission processing
2
2
1
Off = Not connected to server
> Check the power supply, the Ethernet cable connection and internet connection.
Lighted = Connected to server
Blinking = Sending data
- Off= Initialization default or power failure.
> Check the 230V power connection.
- Slow blinking = No network.
> Check the connection of the RJ45 cable and check the internet connection.
- Fast flashing = Resolution DHCP operating.
> Requires at least one second. If the blinking continues, check the activation
of DHCP in the management interface of your internet router.
- Fix illuminated = Network Connection.
> The Internet Transmitter is well connected to the network.
1
5