Pentair INTELLIPOOL AUTOMATION Guía De Instalación Y Usuario página 25

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 162
Setpoints menu
This menu allows to set all the setpoints of connected equipments.
Some settings can be only accessible through a professional account.
Get PC time on Control center
The choice of the type of disinfectant is
directly on the Control center.
The timer settings are used only if the
filtration is set on timer mode in the menu
Commands.
The timer settings are used only if the
lighting is set on timer mode in the menu
Commands.
Any changes made since the Internet may
take up to 15 minutes to see its application
on the installation.
Turnover of pool volume
x3
x2
x1
0°C
Setpoints : 45000
Pool information
Heating
AUX 1 Auto BackWash
pH regulation
ORP
Filtration
0h 1h 2h 3h 4h 5h 6h 7h 8h 9h 10h 11h 12h 13h 14h 15h 16h 17h 18h 19h 20h 21h 22h 23h 24h
Filtration authorizations in automatic mode
7h
Start time :
Priorité pH :
Priorité RedOx :
Lighting
0h 1h 2h 3h 4h 5h 6h 7h 8h 9h 10h 11h 12h 13h 14h 15h 16h 17h 18h 19h 20h 21h 22h 23h 24h
Save modifications
Display depend of type of equipments connected and options chosen.
: not accessible in pool owner account
5°C
10°C
15°C
Synchronize time
28
Volume :
24
Setpoint value :
backwash
Feature affectation :
7.3
Feature affection :
pH-
pH corrector type :
20
Injection time :
0.3
Maximum volume :
650
Setpoint value :
Electrolysis
Disinfectant type :
3
Anti freezing :
30
Eco mode :
30
Mode turbo :
Timer settings
Auto
Stop time :
Priorité chauffage :
11
Color choice :
Timer settings
20°C
25°C
30°C
Heating value to be achieved in AUTO mode in
the menu Commands
3
m
pH value to be achieved in AUTO mode in the
menu Commands
°C
- The choice between pH and pH + is directly
accessible on the Control Center.
- The choice is not available with a customer
mode.
s
ORP value to be achieved in AUTO mode in the
menu Commands
mV
Value of frost protection.
°C
%
This setting will limit the time frame of the filter
%
to ensure it does not work at times innoportuns
(noise problems at night with respect to the
neighborhood, for example).
Priority is used to control the filtration during the
time frame allowed (because the equipment
required to operate when the filter is in
operation and under normal circumstances,
these items are not allowed to drive the
filtration).
Optimal pump speed
Water temperature
35°C
23

Publicidad

Tabla de contenido
loading

Tabla de contenido