Parts Description; Control Connection Of Remote Distance (Option) - Lavorwash 160F Manual Para El Usuario

PARTS DESCRIPTION

EN
The main parts of engine are located as follows (Fig.1)
Engine switch

CONTROL CONNECTION OF REMOTE DISTANCE (OPTION)

The holes in levers of both the choke and throttle valve are used for mounting op tioned steel wires. Fig.
2, 3 & 4 shown illustrate how to mount a solid steel wire and a meshed steel wire. If choosing a Accessory
Options: meshed steel wire, a return spring is added.
If necessary, you may un screw the damping nut on the throttle valve lever slightly when controlling the
throttle valve by a remote - controlled steel wire.
Accessory options:
Remote-controlled throttle:
26
Fuel tank cap
Fuel tank
Dipstick
Drain plug
Air cleaner
Muffler
Stiff steel wire
Stiff steel wire
Damping nut
of throttle valve
lever
Exhausting-pipe
Oil plug
Drain plug
Drain plug Kick-starter
Choke lever
Spark plug
Fuel cock
Flexible
steel wire
Snap ring
Starting
rope handle
Throttle lever
fig. 1
4mm screw
Steel wire fixer
Throttle valve lever
fig. 2
Return spring
fig. 3