Mounting The Front Shelf; 11. Installing The Cooking Components - Pit Boss PRO Serie Manual De Operación

Ocultar thumbs Ver también para PRO Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

10. MOUNTING THE FRONT SHELF

Parts Required:
1
x
Front Shelf (#18)
2
x
Washer (#B)
Screw (#H)
2
x
Nut (#I)
2
x
2
x
Bushing (#J)
Installation:
From underneath, insert the screw (from the outside) into the front
shelf bracket and the front shelf, then add the bushing onto the screw,
the washer, then the nut.
Repeat installation for the other side of the front shelf.
NOTE: When installed correctly, the front shelf can be raised (for use)
and lowered (for storage) with ease.
IMPORTANT: Avoid using the shelves to move or lift the grill. The
weight of the unit will cause the shelves to break, which is not
covered by warranty.

11. INSTALLING THE COOKING COMPONENTS

Parts Required:
3
x
Porcelain-Coated Cooking Grids (#2)
1
x
Porcelain-Coated Upper Cooking Rack (#1)
1
x
Flame Broiler Main Plate (#5)
Flame Broiler Slider (#4)
1
x
Installation:
Insert the flame broiler main plate into the main grill. Rest the flame
broiler main plate on the built-in ledge (on the inside right) of the
main grill that directs grease towards the grease bucket spout. Slide
the entire piece to the left side, and the two slots on the flame broiler
main plate will fit into the rounded ledge above the burn pot. It will
sit slightly at a downward angle. Note illustration 11A.
NOTE: If the main plate is on the base of the barrel, it is installed
incorrectly.
Place the flame broiler slider on top of the flame broiler main plate,
covering the slotted openings. Ensure the raised tab is on the left,
to easily adjust for direct or indirect flame when cooking. Note
illustration 11B. Both flame broiler parts are lightly coated with oil to
avoid rusting when shipped.
NOTE: When the flame broiler slider is open, and direct flame is used
while cooking, do not leave the grill unattended for any period of time.
Place the cooking grids, side-by-side, on the grid ledge inside the main
grill. Place the upper cooking rack on the upper ledge inside the main
grill. The cooking rack will lock into place. Note illustration 11C.
IMPORTANT: To maintain optimal searing and grilling performance
of your cooking grids, regular care and maintenance is required.
10
10
I
B
J
H
18
11A
5
11B
4
5
11C
1
2

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Pro pb820ps1

Tabla de contenido